Filter By:
- Parts & Accessories (56)
- Cranksets (110)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cranksets
$1.99
RaceFace CINCH Bottom Bracket Spacers
- For use with 30mm CINCH spindle systems
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
$4.99
- Stock steel chainring bolts found on low/mid-range Race Face cranks
- For double cranksets
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
$5.99
Race Face Crank Arm Fixing Bolts
- For EXI Cranks
- Bolt Puller Cap Washer for self-extracting bolt
$5.99
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
$6.00
M8 Capless Crank Arm Bolt Kit
- For square-taper & Powerspline
$8.00
Problem Solvers Crank Arm Fixing Bolts
- 8mm
- Sold as a pair
$9.00
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks
- RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost)
- Mounts using a common Park BBT-22 tool
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$9.99
Race Face Crank Arm Fixing Bolts
- M18 Crank Bolt
- Fits 15SX/Atlas/SixC CINCH
- Self-extracting
$10.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
$11.99
Race Face Crank Arm Tab Spacers
• Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used
• Fits all Race Face cranksets
• Use double bolts
$11.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
- For Descendant Carbon and non-Eagle XX1 and X01
$14.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact.
- Injection molded plastic crank arm protection
- Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes
- Material: Injection molded plastic
- Recommended Group: XX1, X01, XX, X0
$14.99 - $15.00
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$14.99
Race Face Crank Arm Fixing Bolts
- M18 Crank Bolt
- Fits 15SX/Atlas/SixC CINCH
- Not self-extracting
$15.00 - $20.00
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps
- HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm
- Hollow bolts (SH-21504) not recommended for non-treated spindles
Page 1 of 6
Next page