More

RaceFace Crank Arm Fixing Bolts - M15

- Aheadset preload adjusting bolt

Service parts for Fox suspension.

Volume Spacer tuning kits for FOX suspension fork service and repairs.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Brass compression olive for Hope hydraulic disc brakes.

BB30 Spacer - 15.46mm

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Flat head screws from Wheels Manufacturing.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Parts for repair and maintenance of DT Swiss hubs.

Shimano hydraulic brake lever small parts for replacement and repairs. - Bleed screw and O-ring for Shimano 105 ST-R7020 hydraulic 2x11 dual control lever

- 40mm long brake blocks with hardware to fit basic caliper brakes

RockShox Rear Shock Parts

Shimano Y8H298040 SM-BH59 Olive and connecting insert

Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Brass hose insert for Hope hydraulic disc brakes.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

Frame Plugs for Internal Cable Routing

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings