Tires

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

- 0.9mm wall thickness - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.

We're not afraid to say it—our Airlock Schrader Valve Tubes are the best performing, self-sealing bicycle tubes available. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for the best chance of reducing punctures. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

One tube to rule them all! Are you riding a mixed wheel size mullet bike? Can't decide to bring a 27.5" or 29" spare? Or do you just want to be a trail hero saving others with your versatile tube that fits both 27.5" and 29"? The new MTN MULLET tube takes the guess work out of which size tube you should pack. At the drop of a hat, this tube is ready to take care of business up front or ride the party in the back. - 40mm Presta Valve - For tire size: 27.5/29x2.3-2.6 58-66x584/622 - Tube weight: 220g

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

- Exceptional friction reduction and anti-wear properties with greatly reduced friction in metal to metal applications

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

Knurled aluminum body for better grip. - CNC Machined from 6061 T6 aluminum

- 0.9mm wall thickness - Removable valve core - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4