BIKE SERVICE AND REPAIR

• Clean and lube/replace chain 
• Adjust shifting
• Check hanger alignment or replace
• Check B tension, limit screws

• Complete removal, clean and reassembly
• Lube or replace chain
• Replace cables and housing
• Check hanger alignment or replace
• Check B tension and limit screws
• Adjust shifting

• Replace cables and housing
• Pads file or replaced
• Calipers aligned
• Rotor cleaned or replaced
• Torque all parts to factory spec

• Full brake flush
• Calipers aligned
• Rotor cleaned or replaced
• Pads filed or replaced
• Torque all parts to factory spec

• Lower leg dropped
• Lip seals replaced
• Lower leg oil replaced
• Stanchions inspected
• Reassembled to factory spec

• Basic maintenance +
• Full air spring service
• Full damper service
• Oil, seals, o-rings and glid rings replaced
• Reassembled to factory spec

• Air can service
• Air can seals replaced
• Air can oil replaced
• Inside of air can inspected
• Reassembled to factory spec

• Basic Maintenance +
• Full damper service
• Oil, seals, o-ring and glide rings replaced
• Reassembled to factory spec

• Firmware updated
• Available on Specialized, Bosch and Shimano bikes

• Firmware Update
• Connections checked and treated with connection cleaner
• Motor mount bolts torqued to spec

We completely flush all the old fluid out of the brake to ensure there are no bubbles and to maintain the seals.

Brakes are adjusted. Pads are replaced if needed.

Both derailleurs are adjusted.

Chain is properly sized and installed.

We install your fork and replenish the grease in your headset.

Saddle is installed and set to height and angle of previous position when known.

Stem installed and headset adjusted

Computer is installed and calibrated

The bearings are cleaned, inspected for wear and reassembled for proper adjustment.

We will lace up your wheel ensuring that it is properly tensioned and is round and true.