Accessories/Parts

- Beacon Light License plate relocation bracket - Includes bracket, M5 x 10mm (2), M5 x 16mm (2) Torx screws, mini Torx screwdriver

- Beacon Light direct mount kit for Thule Easyfold car rack - Includes Thule direct-fit bracket, M5 x 25mm (2) and matching nuts (2), M5 x 10mm (2), Torx screwdriver

- Tail light, brake light, turn signals and hazard lights - all synced to your vehicle's lighting. - Universal mounting system allows Beacon Light to be used with any bike rack. - Beautifully designed with an aluminum housing and strong polycarbonate lens for many years of reliability.

If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

Protect your rides

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

This allows you to use a standard 9mm QR bike on the HotRod or SwitchHitter. Simply remove the end nut and slide this into the 15mm x 100mm axle provided.

A dummy axle and non-locking 9mm quick release to be used with RockyMounts DriveShaft HM & DriveShaft Track for standard 9mm bikes. FAQ Can I get this with a lock? No, locking QR does not work in this application.

Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.

RockyMounts' Frame Bar is a spring loaded telescoping tube used to adapt ladies', kids', and full suspension bikes to top-tube carrier hitch racks.

Each set of Lock Cores come with two keys. Our lock cores are sold separately on roof top racks (allows keying the same) and work with all RockyMounts' products. Each lock core is coded so you can easily have a matching set for easy access to your equipment now and in the future.

Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat. Product Features: - Extends rack 8 inches from receiver - Only for 2-inch hitch receivers - Uses RockyMounts 3-axis anti wobble system - Reduces vehicle hitch capacity by 50% - Ideal for vehicles with spare tires, recessed hitches or van doors - Includes locking hitch pin with premium lock pod, can be keyed alike - 10lbs

Expand the carrying capacity of your GuideRail from a 2 bike set up to a 3 bike setup. Not Compatible with the AfterParty or 1.25" GuideRail - Compatible with GuideRail 2" Expandable to 3 bikes up to 45 lbs per tray, with Add-On (2" Only.) - Lowers max weight capacity from 60 lbs per tray to 45 lbs per tray - Bike can be loaded asymmetrically to eliminate handlebar interference - No contact with frame or fork, secures bicycle by contact with tires only - Carries 19mm road tires up to 3.0" wide mountain bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 55" - Not for use with fender equipped bicycle - Rack weight 18lbs (Shipping weight 23lbs) - Includes another chain to allow you to lock all three bikes.

Swagman brings you a brilliant tool for storing your hitch-mount bike rack when it's not attached to your hitch. The X Mount can be attached to any wall to create a virtual hitch. Just mount the rack like you would on your car or truck, and fold the rack up against the wall to get it out of the way. When you're not using it, the X Mount itself will even fold against the wall, creating an even lower profile. - Fits 2-inch receiver style bike racks and 2-inch receivers with 1-1/4-inch universal adapter. - Stores bike rack when not in use - Folds against wall when not in use

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plating for maximum rust protection - 7.5 ft. long 10mm security cable with hitch pin adapter

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter

An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Pair of EndCaps for Yakima JetStream bars.

Rear wheel strap for Boa bike mount. Includes one strap.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty

Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in