Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories

$11.00
Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!

$13.00
Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!

$15.00
- Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!

$18.00 - $30.00
The square bottom on the rubber, plus the rubber extending down the valve helps create the best airtight sealing system. Set up is a breeze and works much better than other valves on the market.
- 44mm valve for 28mm carbon, Altamont, Altamont, CCC, and MTB wheels
- 60mm valve for 44mm carbon and 36mm depths (36 Road Disc, Pinnacle, and Jocassee)
- 80mm valve for 55 Road Disc and 60mm carbon
- 110mm valve for 90mm carbon and 90 Road Disc
- Weights for the valve (with nut for tightening) is: 44mm—5g, 55mm—5g, 60mm—6g, 80mm—6g, 110mm—8g

$21.95
The Campagnolo N3W Freehub Adapter enables use of Ekar’s 13-speed cassette.
- Includes 11t Lockring

$31.95
Front disc brake quick release conversion kit from Campagnolo.
- Convert Campagnolo Bora and Shamal disc brake wheels from thru-axle to quick release
- Includes axle, end caps and adjusting sleeve
- Quick release sold separately

$31.95
Quick release conversion kit for disc brakes.
- Convert Campagnolo Bora and Shamal disc brake wheels from thru-axle to quick release
- Includes axle, end caps and adjusting sleeve
- Quick release sold separately

$499.00
Upgrade your Mavic wheels with a CeramicSpeed Wheel Kit to reduce friction, increase performance, and get the most out of your Mavic Wheels immediately. The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings.
In The Box:
- 3 x 61901 bearings
- 2 x 608/9 bearings
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
- Front hub bearings: 61901 + 61901
- Rear hub bearings: 61901 + 608/9 + 608/9
Remember to add grease and mount seals before installation.

$639.00
Choose to ride even faster by using CeramicSpeed Hub Bearings in your wheels. The DT Swiss-1 wheel kit fits 240s Road hubs, which are used by many wheel brands. Other kits are available for disc wheels and DT180 as well.
The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings.
In The Box:
- 2 x 61802 bearings
- 2 x 61803 bearings
- 2 x 61902 bearings
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
Remember to add grease and mount seals before installation.

$642.00
Choose to ride even faster by using CeramicSpeed Hub Bearings in your wheels. The DT Swiss-3 wheel kit fits 240s Disc hubs. Other kits are available for DT 240s rim brake hubs, and DT180 as well.
The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings.
In The Box:
- 2 x 61903/18 bearings
- 2 x 61802 bearings
- 2 x 61902 bearings
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
Remember to add grease and mount seals before installation.

$699.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings.
All components are optimized for low friction and prolonged lifetime.
This wheel kit is compatible with 2015 & forward (77/177 hubs) + Mid 2018 & forward NSW Rim Brake Hubs.
In The Box:
- 4 x 61803 bearings
- 2 x 61903 bearings
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet

$714.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings.
All components are optimized for low friction and prolonged lifetime.
This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018).
In The Box
- 4 x 61803 bearings
- 1 x 61903 bearing
- 1 x 61804 bearing
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet

$719.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard bearings.
All components are optimized for low friction and prolonged lifetime.
This kit is compatible with 2015+ (77/177 hubs) disc brake hubs & NSW Disc.
In The Box
- 4 x 61903 bearings
- 2 x 61803 bearings
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet

$165.00
Rear Hub Driveshell Conversion with Twin bearings for easy repair or replacement.
- Designed to fit MTN hubs

$344.00
Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap.
Micro Spline Driveshell Instructions
- Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX
- Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

$442.00
Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell, and all driveshell internals for a plug-and-play swap.
Micro Spline Driveshell Instructions
- Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX
- Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

$4.24 - $36.15
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

$12.00 - $16.00
DT Swiss Standard Rear Quick Release Skewers.
- Traditional cam-operated lever
- Stainless steel shaft

$15.79 - $45.99
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples

$38.90 - $52.00
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening

$41.60 - $49.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Conical X12 washer, compatible with Syntace X-12 system
- Thread Pitch: 12 x 1.0mm

$49.79
Make it more aerodynamic – this nipple is hidden inside the rim.
DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface.
- Weight: 22g for 64 nipples

$54.00
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

$72.00
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
Page 1 of 4
Next page