More

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-13-15-18-21-24-28 - 12 – 28T: 12-14-16-18-21-24-28 - 12 – 32T: 12-13-15-18-21-24-32

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Made of forged aluminum - Quality chrome-plated bolt and superior finish - Black

- Forged aluminum seatpost clamp and quick release

Service parts for Fox suspension.

Volume Spacer tuning kits for FOX suspension fork service and repairs.

External adjusters and parts for Fox suspension fork service and repair.

Rebuild seal kits for Fox rear suspension service and repair.

Air spring seal kits for Fox suspension repair and rebuild.

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.070 TLG, 210/185X 55/50

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.464 TLG, 230/205X 65/60

IFP Height Tool, (100mm Travel), 2021-on Transfer

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Float Body for FOX suspension service and repair. - FOX Rear Shock Body - FLOAT, 0.940 Bore, 1.060 OD, 4.396 TLG, Black Ano III, 190 x 40/45

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

34 Rhythm Air Shaft Assembly for Fox suspension fork service and repair.

Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV

If you're looking to increase or decrease the travel of your 2021 or newer Fox Float 36 fork, simply snag one of these air shafts in the travel which you'd like to set your fork to, and swap it into your fork! The new 2021+ Air Shaft boasts a larger negative air volume chamber compared to the previous generation. - Fits all 2021+ Fox 36 Factory Series, Performance Series Elite, and Performance Series forks. - Does NOT fit the Fox 36 Rhythm. - Includes brand new seals pre-installed, plus a new foot nut and crush washer. - NOT BACKWARDS COMPATIBLE with older Fox 36 forks. *NOT backwards compatible with older model years.

36 Air Shaft Assembly for Fox suspension forks.

36 Air Shaft Assembly for Fox suspension forks.

36 Air Shaft Assembly for Fox suspension forks.

If you're looking to either increase or decrease the travel of your 2021/2022/2023 Fox Float 38 fork, simply purchase this air shaft and install it into your fork. - Includes brand new air shaft seals pre-installed - Includes new snap ring, foot nut, and crush washer - Compatible with all models of the Fox 38, including the Fox 38 E-Tuned

SLS coil springs are a lighter weight steel spring with a lower un-sprung weight to improve performance compared to the standard FOX coil spring. They are also lighter than titanium springs at more affordable prices. The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks. - Internal Diameter: 35 mm/1.385" - Lower un-sprung weight of the SLS coil spring improves performance compared to the FOX standard coil spring - For riders that want the performance and light weight of an SLS spring with the added benefit of a matte color to match their rear shock

FOX Transfer Neo remote provides easy actuation via wireless communication to the Neo Transfer dropper post. - Wireless lever is designed to be as familiar feeling as possible. A rubber-coated thumb pad mimics the texture and distance from the handlebar of a regular Transfer lever, but with a shorter, 6x lever throw reduction for smoother operation - Includes different adapters to accommodate multiple control configurations

The Transfer rises again with a full redesign, making it smoother and more robust than ever before. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer gets an overall edge over the competition. Now travel adjustable in 5mm increments and available up to 240mm of drop. The best-of-the-best technology is available in the Factory Series models, featuring buttery smooth, ultra durable Genuine Kashima Coat. - Fully redesigned hydraulics of the 2025 Transfer feature an entirely new sealing system for enhanced durability. The full-service interval is now at 300 hours, which most riders can do with the tools in their garage - Metal-backed EKONOL (PTFE/Teflon) bushings to achieve tight tolerances and the lowest possible friction to allow easier actuation - The placement of the new air chamber allows riders to recharge and adjust air pressure through a Schrader valve under the seat clamps. Tune to your preferred return speed or adjust for environmental factors such as altitude or ambient air temperature. A metal valve cap with O-ring (the same we use on FOX suspension) ensures zero air leaks through the valve - Low stack height and 2-bolt clamp design that riders loved from the previous Transfer, while improving aesthetics and keeping weight to a minimum - Wider range of options, with up to 240mm of drop, and adjustable travel (up to 25mm in 5mm increments) - Cable actuated with tool-free quick disconnect for easier installation and removal, low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Remote lever sold separately

The Transfer rises again with a full redesign, making it smoother and more robust than ever before. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer gets an overall edge over the competition. Now travel adjustable in 5mm increments and available up to 240mm of drop. The best-of-the-best technology is available in the Factory Series models, featuring buttery smooth, ultra durable Genuine Kashima Coat. - Fully redesigned hydraulics of the 2025 Transfer feature an entirely new sealing system for enhanced durability. The full-service interval is now at 300 hours, which most riders can do with the tools in their garage - Metal-backed EKONOL (PTFE/Teflon) bushings to achieve tight tolerances and the lowest possible friction to allow easier actuation - The placement of the new air chamber allows riders to recharge and adjust air pressure through a Schrader valve under the seat clamps. Tune to your preferred return speed or adjust for environmental factors such as altitude or ambient air temperature. A metal valve cap with O-ring (the same we use on FOX suspension) ensures zero air leaks through the valve - Low stack height and 2-bolt clamp design that riders loved from the previous Transfer, while improving aesthetics and keeping weight to a minimum - Wider range of options, with up to 240mm of drop, and adjustable travel (up to 25mm in 5mm increments) - Cable actuated with tool-free quick disconnect for easier installation and removal, low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Remote lever sold separately

The Transfer rises again with a full redesign, making it smoother and more robust than ever before. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer gets an overall edge over the competition. Now travel adjustable in 5mm increments and available up to 240mm of drop. The best-of-the-best technology is available in the Factory Series models, featuring buttery smooth, ultra durable Genuine Kashima Coat. - Fully redesigned hydraulics of the 2025 Transfer feature an entirely new sealing system for enhanced durability. The full-service interval is now at 300 hours, which most riders can do with the tools in their garage - Metal-backed EKONOL (PTFE/Teflon) bushings to achieve tight tolerances and the lowest possible friction to allow easier actuation - The placement of the new air chamber allows riders to recharge and adjust air pressure through a Schrader valve under the seat clamps. Tune to your preferred return speed or adjust for environmental factors such as altitude or ambient air temperature. A metal valve cap with O-ring (the same we use on FOX suspension) ensures zero air leaks through the valve - Low stack height and 2-bolt clamp design that riders loved from the previous Transfer, while improving aesthetics and keeping weight to a minimum - Wider range of options, with up to 240mm of drop, and adjustable travel (up to 25mm in 5mm increments) - Cable actuated with tool-free quick disconnect for easier installation and removal, low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Remote lever sold separately