Filter By:
- Parts & Accessories (96)
- Wheels (219)
- Hubs (15)
- Rims (6)
- Spokes (15)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels

$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum
- Similar to Fox Kabolt axle

$71.99
- Position Front
- Wheel Diameter/ISO 700C / 622
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim and Disc IS 6-bolt
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Double wall
- Rim Internal Width 18.4mm
- Rim inner width range 0-21.9mm
- Rim Color Black
- Rim Drilling 36
- Hub Model Shimano HB-M475
- Wheel Weight -
- Spoke Type Stainless
- Valve Schrader
- Rim External Width 24.4mm
- Depth 16mm
- Rim Model Alex DM18
- Skewers Included Yes

$20.99 - $21.99
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap
- Fit for most other tubeless rims and wheel

$99.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

$154.00
High quality sealed bearing hub is available in traditional and modern configurations.
- Steel axle, aluminum end caps with steel knurled contact surfaces
- Same proven driver mechanism as higher priced models
- Spoke Interface: J-Bend
- Hub/Brake Compatibility: 6-Bolt Disc
- Skewer Included: No
- Bearing Type: Sealed Cartridge

$198.90 - $210.90
Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.

$38.99
- Position Front
- Wheel Diameter/ISO 26'' / 559
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Double wall
- Rim Internal Width 19mm
- Rim inner width range 0-21.9mm
- Rim Color Black
- Rim Drilling 36
- Hub Model Formula FM-21-QR
- Wheel Weight -
- Spoke Type Stainless
- Valve Schrader
- Rim External Width -
- Depth 20mm
- Rim Model Evo E-Tour 19
- Skewers Included Yes

$79.99
Rims: Evo Tour 19 27.5"
- ETRTO 584-19
- Inner width: 19mm
- 6061-T6 Alloy
- Double Wall
- Powder Coat satin black finish
- CNC machined sidewalls
- Drilled for Schrader valve
- Rim or Disc Brake compatible
- 36 holes
Front hub:
- QR 9x100mm (Quick Release binder included)
- 6-Bolt ISO disc mount
- 6061-T6 Alloy
- Anodized black finish
- Adjustable bearings
- Rubber seals

$55.00
Convert Roval wheels with 142 or 142+ to be used with Boost spacing (110 /148mm) suspension forks and frames.
- Kits include front and rear hub end caps, rotor spacers, and kit specific rotor bolts
- Compatible with select MY13-16 Roval Wheels. Choose the appropriate SKU for each wheelset
- Each conversion kit requires the existing rear wheel to be re-dished to center. Consult an authorized dealer to perform this operation

$308.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

$198.90 - $210.90
Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.

$18.00 - $25.00
The square bottom on the rubber, plus the rubber extending down the valve helps create the best airtight sealing system. Set up is a breeze and works much better than other valves on the market.
- 44mm valve for 28mm carbon, Altamont, Altamont, CCC, and MTB wheels
- 60mm valve for 44mm carbon and 36mm depths (36 Road Disc, Pinnacle, and Jocassee)
- 80mm valve for 55 Road Disc and 60mm carbon
- 110mm valve for 90mm carbon and 90 Road Disc
- Weights for the valve (with nut for tightening) is: 44mm—5g, 55mm—5g, 60mm—6g, 80mm—6g, 110mm—8g

$29.99
V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts.
- 7075 Machined Aluminum valve stem and cap
- Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts
- 4mm machined Allen Key slot for easy installation and removal
- Includes Valve Core Removal Tool (integrated into spare alloy cap)
- Supplied with various rubber bases to optimize fit with multiple rim types

$42.00 - $54.99
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.

$89.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system.
- Axle: 14mm chromoly (heat-treated)
- Driver: 1-pc chromoly RHD or LHD
- Driver bearings: 6802 (x2), verify bearing number on side of rubber seal
- Driver pawls: 3 Pawl
- Driver spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal
- Drilling: 36H
- Weight: 45.4-ounces

$89.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim.
- Includes Stolen PVC rim strip
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20"
- ISO Diameter: 406 / 20" BMX
- Valve: Schrader
- Tire Type: Clincher
- Rear Axle: 14mm Threaded x 110mm
- Driver: 1-pc chromoly RHD or LHD
- Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal
- Driver Pawls: 3 Pawl
- Driver Spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal
- Spokes: 183mm (3X) Black w/Black Brass nipples
- Drilling: 36h only
- Weight: 45.4 oz

$46.49 - $54.49
Sta Tru Rear Wheels
- Single Wall rim
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher

$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride.
R is for rally.
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster
- Wider bearing stance
- 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Each pawl has its own spring
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- 30mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- New stronger alloy for highest impact resistance of any Race Face or Easton rim
- High gloss black water transfer logos

$49.99
Sta Tru Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 27"
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 630 / 27"
- Tire Type: Clincher

$43.49 - $72.99
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher

$61.99
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 18-inch
- ISO Diameter: 355 / 18-inch BMX
- Front Axle: 3/8-inch x 100mm
- Tire Type: Clincher

$62.00 - $69.00
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more!
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins.
- No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench.
- Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer.
- Designed, built, and quality tested in the USA. Proven around the world.

$19.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.

$33.00
CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel.
- Length: 298mm
- Spoke Interface: Straight Pull

$19.00 - $30.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Page 1 of 12
Next page